- Home |
- Models |
- HD Cameras |
- DF4500HD |
- Technical data
HD IP box camera, 720p
| Technical specifications | ||
| Sensor | 1/2.5" 5-Megapixel CMOS sensor | |
| Signal processing | Digital Signal Processing | |
| Image capture | Progressive | |
| Transfer format | Progressive (full image) | |
| Sensor resolution | 5MP | |
| B/W and colour mode | Automatic / manual | |
| IR filtering | Included IR Cut filter | |
| Day/Night functionality | Electronic switching (no mechanical ICR function) | |
| Light sensitivity | At F1.0, 50IRE: 1.6 lux | |
| Shutter speed | 1/30 s to 1/1000 s | |
| Signal to noise ratio (SNR) | > 45 dB | |
| Digital noise reduction (DNR) | On/Off | |
| Brightness adjustment (ALC/AE) | Automatic / manual | |
| Automatic gain control (AGC) | Automatic / manual | |
| Adjustable white balance | AWB | |
| Configuration | Via web browser | |
| Languages | English | |
| Motion detection (VMD) | With selectable sensitivity (5 thresholds) | |
| Alarm notification | Via ftp upload | |
| Lens specifications | ||
| Mount | CS mount | |
| Iris range/ focal length range | Standard version delivered without lens | |
| Iris control | Manual, DC auto iris | |
| Horizontal angle of view | - | |
| Lens variants | Lens: F1.8/ 4-10 mm, (MP) | |
| Format and coding | ||
| Video compression | H.264, MJPEG | |
| HD standards | SMPTE 296M | |
| Resolution | SD, HD (720p, 2MP) | |
| Frame rate | Up to 5 fps at 2MP (MJPEG) | |
| Up to 30 fps at 720p (H.264) | ||
| Up to 30 fps at D1 (H.264) | ||
| Video bit rate | Up to 8 Mbps (2 Mbps typical) | |
| Video streaming | Simultaneous dual or tri-streaming: H.264, MJPEG | |
| Interfaces | ||
| Video outputs | 1x CVBS/BNC (Preview: analogue SD output) | |
| only for local installation | ||
| Audio outputs | 1x 3.5 mm phone jack (Line OUT, mono) | |
| Ethernet | 1x RJ45, 10BASE-T-/100BASE-TX-PoE | |
| Ethernet protocols | DHCP, HTTP, UDP, UPnP, FTP, SMTP, RTP | |
| Local video memory | SDHC card | |
| Further specifications | ||
| Video norm | HDTV, SDTV (PAL/NTSC) | |
| Voltage supply | 12V DC +/-10%, via PoE (Class 0) | |
| PoE conformity | IEEE 802.3af | |
| Power consumption | Max. 4 W | |
| Dimensions | Approx. B 71 x H 66 x L 116 mm (without lens) | |
| Weight | Approx. 300 g | |
| Operating temperature | -10°C - 45°C, recommended 0°C - 35°C | |
| Humidity | 0% - 90% RH non-condensing | |
| Approvals/certifications | CE | |
| V1.2.0 Product specifications subject to change without notice. © 2006-2010 Dallmeier electronic | ||